Philips Xitanium Xi FP 40W 0.3–1.0A SNLDAE 230V S175 sXt – Programmable DALI LED Driver

The Xitanium Full Programmable Xtreme is a professional programmable LED power supply from Philips/Signify. It allows the output current to be configured according to the electrical requirements of the connected LED module, enabling one driver type to be adapted for different compatible LED applications. The driver supports programmable output-current configuration using SimpleSet technology as well as digital DALI-2 control.

This specific driver is factory-set to 700 mA by default. When used with an LED module designed for an operating current of 700 mA, the output-current setting does not need to be changed before installation. If the connected LED module requires a different operating current, the driver must be programmed accordingly. The electrical limits of the connected LED module must always be observed when changing the output-current setting.

The driver features a SELV galvanically isolated output and protection against short circuit, open circuit and overpower conditions. The rated lifetime specified by the manufacturer is 100,000 hours.

Technical Specifications

Type: Xi FP 40W 0.3-1.0A SNLDAE 230V S175 sXt

Order code: 929002172506

EAN: 8718699765392

Rated power: 40 W

Input voltage: 230 V

Output current: programmable

Default factory output-current setting: 700 mA

Maximum output current: 1050 mA

Output-current configuration: programmable / SimpleSet

Control interface: DALI-2

Output isolation: SELV

Maximum efficiency: 89%

Maximum THD: 8%

Output-current ripple: max. 4%

Dimensions: 175 × 46 × 34 mm

Ingress protection: IP20

Installation: built-in

Ambient temperature range: −40 to +55 °C

Rated lifetime: 100,000 h

Short-circuit protection: yes

Open-circuit protection: yes

Overpower protection: yes

Mounting

The driver is designed for built-in installation inside a luminaire or suitable electrical enclosure. The required operating current of the LED module must be checked before connection. For LED modules designed for 700 mA, the driver's standard 700 mA factory setting can be used without reprogramming.

Applications

The driver is designed for professional LED luminaires and constant-current LED modules requiring programmable operating parameters and DALI control. The programmable output current allows the driver to be configured for different compatible LED modules.

Manufacturer Product Page

Signify – Xi FP 40W 0.3-1.0A SNLDAE 230V S175 sXt, 929002172506